Telephone Extension Setting - Evolu7 Link Guide D'utilisation

flash at the same time. You will hear a voice prompt: setting
completed, please enter instruction.
Operating: 【XX】【YY...YY】【#】
number
Example: set 13811111111 to be first group alarm phone number
Operation: 【51】【13811111111】【#】

Delete Alarm Number Setting
In setup status, enter [51]~[56], finally press [#] to confirm. The
main host makes a long beep, the [signal] flash at the same time.
You will hear a voice prompt: deleted successful, please enter
instruction.
Operating: 【XX】【#】
Example: The third group alarm phone number is deleted
Operation: 【53】【#】


Telephone Extension Setting

If the host is connected to the telephone line extension through
the telephone exchange; in phone number settings, external
outgoing line number would be required (external outgoing line
number: refers to additional figure, generally 0 or 9 in
exchange, selected for external outgoing dialing through
telephone extension).
In Settings, first enter address code [51]~[56], enter external
outgoing line number 0 or 9, then enter phone (mobile) number
and finally press [#] to confirm; voice prompts: set successfully,
please enter instruction.
Settings:【XX】【A】【YY...YY】【#】
A: external outgoing line number of phone exchange
extension.
XX indicates: 1-6 alarming user number [51]~[56]
YY...YY indicates: voice alarm-receiving phone
XX indicates: 1-6 alarming user number [51]~[56]
YY...YY: phone number, without digit limit, even
52