Wireless Pir Detector; Function Settings - Evolu7 Link Guide D'utilisation

Wireless PIR detector

PIR detectors are used to detect the
movement within a certain range.

Fix the adjustment bracket on
the wall with the provided
screws and
detector to the bracket. It is
recommended to mount it at a
height of 2-2.2m above the
floor.

Effect of the PIR detection is best when the detection direction is in 90°
angle with the walking direction of the intruder. Choose the most
suitable installation place and angle according to actual situation and
taking the following installation diagram as reference to ensure the
detection effect is best.

Please do not fix it under direct sunlight or other strong lights and also
keep it away from places with frequent strong air stream.

If the low-power indicator is on, please change the battery.


Function Settings

If the host is electrified and in arm state (LCD display locked icon,
［ARM］or［Home］light,we must disarm the host: Press
control [ ] key to disarm ; or through the host keyboard , if the
host keyboard lock function is off , when you want to disarm ,
Press the disarm button directly [
keyboard lock function is on, you need to press [
user password according to the voice prompts , input [#] key to
confirm. . Host voice prompts: the system is disarmed.
Remote disarm :press [
Host Disarm : [ disarm
+ [ user's password ] (keyboard lock on)
attach the
] key once
] ( keyboard lock off ) or [ disarm
44
] can be realized disarm ; host
remote
], then input
]