Artificial Recording; Recording Playback; Remote Control Settings - Evolu7 Link Guide D'utilisation

settings: [0]: no alarm for home (stay-in) defense zone.
Settings:【61】【XX】【A】【#】
Example: set 10 defense zones as home (stay-in) defense alarm.
Operation:【61】【10】【1】【#】
Example: modify 55 defense zones as no alarm of home (stay-in)
defense.
Operation:【61】【10】【0】【#】


Artificial Recording

In Settings, first enter address code [70] , select artificial
recording [1] and finally press [#] to confirm; [Recording]
flashes, and the recording starts; 30cm to the host, with moderate
tone, recording user information by standard mandarin; after 10
seconds, "beep" sounds.
Settings:【70】【1】【#】


Recording Playback

In Settings, first enter address code [70], select recording
playback [2] and finally press [#] to confirm; host speaker will
immediately play last recording information; after 10 seconds,
"beep" sounds.
Settings:【70】【2】【#】

Remote control
In Settings, first enter address code [71], select whether to
enable/disable [0/1] for remote control and press [#] to confirm;
voice prompts: set successfully, please enter instruction. Factory
settings: [1]: enable remote control.
Settings:【71】【0/1】【#】
"1": enable remote control.
"0": disable remote control.
XX: [01]~[99] corresponds to defense 01 to 99.
A: [0] for no alarm during stay-in defense while [1] for
alarm during stay-in defense.
55