Defense Coding; Delete Defense Zone - Evolu7 Link Guide D'utilisation

8 remote controls
Example: delete No. 3 remote control from alarm host
Operation:【21】【3】【#】


Defense coding

All wireless detectors must be coded with corresponding zones
on the host to trigger host alarm.
In Settings states, first enter address code [23] by host keypad,
then select appropriate defense zone number [01] ~ [99] and
finally press [#] to confirm; the indicator light of defense zone
will always light, LCD displays the corresponding defense zone
number, trigger and send a wireless signal on wireless detector to
be coded; after the host receives the signal, the indicator light of
defense zone goes off, and voice prompts: coding successfully,
please enter instruction.
Settings:【23】【XX】【#】
99.
Example:
zone.
Operation:【23】【01】【#】
LCD display:


Delete defense zone

Once wireless detector of the defense zone is deleted, it never
triggers the host for the alarm.
In Settings state, first enter address code [23] by host keypad,
then select defense zone number [01] ~ [99] to be deleted and
finally press [#] to confirm; voice prompts: delete successfully,
please enter instruction.
Settings:【24】【XX】【#】
XX: [01]~[99] respectively corresponds defense 01 to 99.
XX: [01]~[99] respectively corresponds defense 01 to
Wireless magnetic door code operating in 1defense
47