Toro Flex-Force Power System 60V MAX Manuel D'instructions page 4

For assistance, please see
www.Toro.com/support or
contact your Authorized
Service Dealer before
returning this product.
This product complies with all relevant European
directives; for details, please see the separate product
specific Declaration of Conformity (DOC) sheet.
Introduction
This rotary-blade, walk-behind lawn mower is intended
to be used by residential homeowners. It is designed
primarily for cutting grass on well-maintained lawns
on residential properties. It is not designed for cutting
brush or for agricultural uses. It is designed to
use Toro Flex-Force lithium-ion battery pack Model
81825 (provided with Model 21836), Model 81850
(provided with Model 21843 and Model 21844) and
81860 or 81875. These battery packs are designed
to be charged only by battery charger Model 81802
(provided with Models 21836, 21843, and 21844), or
81805. Using these products for purposes other than
their intended use could prove dangerous to you and
bystanders.
Models 21836T, 21843T, and 21844T do not include
a battery or a charger.
Read this information carefully to learn how to operate
and maintain your product properly and to avoid
injury and product damage. You are responsible for
operating the product properly and safely.
Visit www.Toro.com for more information, including
safety tips, training materials, accessory information,
help finding a dealer, or to register your product.
© 2021—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
Whenever you need service, genuine the
manufacturer parts, or additional information, contact
an Authorized Service Dealer or the manufacturer
Customer Service and have the model and serial
numbers of your product ready.
the location of the model and serial numbers on the
product. Write the numbers in the space provided.
Important:
With your mobile device, you can
scan the QR code on the serial number decal (if
equipped) to access warranty, parts, and other
product information.
1. Model and serial number location
Model No.
Serial No.
This manual identifies potential hazards and has
safety messages identified by the safety-alert symbol
(Figure 2), which signals a hazard that may cause
serious injury or death if you do not follow the
recommended precautions.
Safety-alert symbol
This manual uses 2 words to highlight information.
Important calls attention to special mechanical
information and Note emphasizes general information
worthy of special attention.
2
Figure 1 identifies
Figure 1
Figure 2
Contact us at www.Toro.com.
Printed in China
All Rights Reserved
g275230
g000502