Toro Titan X4850 Manuel D'utilisation page 38

Pre-Maintenance
Procedures
Releasing the Mower-Deck
Curtain
Loosen the 2 bottom bolts of the curtain to access the
top of the mower deck
Figure 42
1. Bottom bolt
Note:
Always tighten the bolts to connect the curtain
after maintenance.
(Figure 42).
2. Curtain
Engine Maintenance
Engine Safety
•
Keep your hands, feet, face, other body parts,
and clothing away from the muffler and other hot
surfaces. Allow engine components to cool before
performing maintenance.
•
Do not change the engine governor speed or
overspeed the engine.
Servicing the Air Cleaner
Service Interval: Every 25 hours—Clean the
Every 100 hours—Replace the air-cleaner foam
element (more often in dusty, dirty conditions).
Note:
Service the air cleaner more frequently (every
few hours) if operating conditions are extremely dusty
or sandy.
Removing the Foam and Paper
Elements
1. Park the machine on a level surface, disengage
g303960
the blade-control switch, and engage the parking
brake.
2. Shut off the engine, remove the key, and wait
for all moving parts to stop before leaving the
operating position.
3. Clean around the air-cleaner cover to prevent
dirt from getting into the engine and causing
damage.
4. Release the retaining clamps on the air cleaner
and pull the air-cleaner cover off the air-cleaner
body
1. Cover
36
air-cleaner foam element (more
often in dusty, dirty conditions).
Figure 43
2. Retaining clamp
g305607