Starting Therapy - arjo Flowtron ACS900 Notice D'utilisation

Masquer les pouces Voir aussi pour Flowtron ACS900:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Starting Therapy

The following four screens show typical Standby
screens with different garment configurations.
A garment connected but not inflated is shown as
an outline on the leg icon. When it is inflated, the
garment outline is filled in black.
The same garment outline is used for both calf
and calf & thigh garments.
Tubeset
Connector 1
Tubeset
Connector 2
Tubeset
Connector 1
Tubeset
Connector 2
Tubeset
Connector 1
Tubeset
Connector 2
Tubeset
Connector 1
Tubeset
Connector 2
Make sure the garment(s) are fitted correctly to the
patient and the pump.
While the pump is in Standby, the LED indicators on
the front and underside of the pump remain
extinguished.
Press the Middle Control button below the Start
Therapy icon to start the therapy. The LEDs on the
front and underside of the pump change to green.
13
No garment connected
Foot garment
Sequential (Tri Pulse) calf or
calf & thigh garment
No garment connected
Uniform (DVT) calf or calf &
thigh garment
Uniform (DVT) calf or calf &
thigh garment
Foot garment
Uniform (DVT) calf or calf &
thigh garment

Publicité

Table des Matières
loading

Table des Matières