Télécharger Imprimer la page

Ryobi RBS-5518 Mode D'emploi page 26

Masquer les pouces Voir aussi pour RBS-5518:

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 6
GB
The sawblade rides outside the cutting line or does not ride correctly:
The sawblade does not ride in the middle of the wheel.
Change the tilt of the upper wheel of the saw.
If the sawblade is distorted, replace it.
The blade is broken:
The sawblade tension is incorrect – adjust it.
Too heavy a load – reduce the pressure on the sawblade.
The blade is distorted: you will get very thin workpieces if the sawblade is too thin and very thick workpieces if the sawblade
is too wide.
The blade is buckled:
Too heavy a load – avoid lateral pressure on the sawblade.
The saw vibrates:
The saw is not properly secured; secure the saw correctly to an appropriate floor.
The table is unstable; adjust and secure the table.
The motor mount is unstable; check the state of the retaining screws and tighten them down if necessary.
The sawdust extraction outlet is blocked:
The extraction device has not been connected or the suction capacity is insufficient. Connect the suction device or increase
the suction capacity (air speed > 20 m/sec in the sawdust extraction outlet).
14.
ACCESSORIES
1. Stand (Fig. 34)
The stand provides an optimum working height of 1,090 mm.
2. Trolley (Fig. 35)
The trolley is ideal for transport purposes. The saw can only be operated on a stand.
15.
TECHNICAL DATA
Model RBS 5518
Voltage: 230 V (1~50 Hz)
Power: 780 Watt
Current rating 3.5 A
Fuse: A 10 (delayed action or automatic - K)
Type of protection IP 54
Nominal idling speed:1400 + / - 10% min- 1
Cutting speed:
Blade speed (fast): 800 + / - 10% m/min
Blade speed (slow): 370 + / - 10% m/min
Sawblade size: 2,240 mm
Throat capacity: 305 mm
Maximum sawblade width: 15 mm
Maximum sawblade thickness: 0.5 mm
Maximum height of cut: 180 mm
Outside dimensions: 590 x 505 x 1,265 mm
Weight excluding accessories: 67 kg
Sound emission levels when idling
A- Sound pressure level LPA: 67 dB(A)
A- Sound power level LPA: 78 dB(A)
Sound emission levels when sawing:
A- Sound pressure level LPA: 85 dB(A)
A- Sound power level LPA: 91 dB(A)
All manuals and user guides at all-guides.com
26

Publicité

loading