Publicité
Les langues disponibles
Les langues disponibles
Basic Operations
)
Numeric
keys
ACTIVE
BASS EX.
SOUND
MODE
Turning the Power On and Off
Turning the System On
1
Press the
STANDBY/ON button.
The display comes on. The STANDBY indicator goes out.
The System comes on ready to continue in the mode it was in
when the power was last turned off.
• For example, if the last thing you were doing was listening
to a CD, you are now ready to listen to a CD again. If you
wish, you can change to another source.
• If you were listening to the Tuner last, the Tuner comes on
playing the station it was last set to.
Turning the System Off
1
Press the
STANDBY/ON button again.
The display goes out, except for the clock display. The
STANDBY indicator lights up. (The display is dimmed.)
• Some power is always consumed even though power is
turned off (called Standby mode).
• To switch off the System completely, unplug the AC power
cord from the wall outlet. When you unplug the AC power
cord, the clock will be reset to AM 12:00 immediately.
7
ACTIVE
BASS EX.
STANDBY/ON
Display
(STANDBY/ON)
STANDBY indicator
PHONES
FADE MUTING
VOLUME +, –
ACTIVE BASS EX. indicator
* When the System is in use, the display shows other items as well.
For simplicity, we show here only the items described in this section.
or
or
Various information
Level bar
Status bar (Indicates various statuses.)
ECO Mode (ECO)
The System has three energy modes; power on, power off (Stand-
by) and ECO. In ECO mode, the display goes off and the least
power is consumed.
To enter ECO mode, press the ECO button on the Unit in Stand-
by mode (while the STANDBY indicator lights up). "ECO
MODE" appears on the display, then the display goes off. The
STANDBY indicator remains lit.
To cancel ECO mode and turn on the power, press the
STANDBY/ON button on the Unit.
To cancel ECO mode and enter Standby mode, press the
ECO button again.
Adjusting the Volume
Turn the VOLUME control on the Unit clockwise to increase the
volume or turn it counterclockwise to decrease the volume.
Press the VOLUME + button on the Remote Control to increase
the volume or press the VOLUME – button on the Remote Control
to decrease the volume.
You can set the volume level to MIN, 1-26, or MAX.
CAUTION:
• DO NOT turn on the System and/or start playing
any source without first setting the VOLUME
control to minimum, as a sudden blast of sound
could damage your hearing, speakers and/or
headphones.
SOUND
MODE
ECO
VOLUME
Sound Mode
indicator
Publicité
