Publicité
Les langues disponibles
Les langues disponibles
Menu operations
Menu operations
1
If no operation is done for about 60 seconds, the
operation will be canceled.
2
Menu item
DEMO
CLOCK
COLOR
COLOR SETUP
DIMMER SET
BRIGHTNESS
SCROLL *2
TAG DISPLAY
PRO EQ
FADER *3*4
BALANCE *4
LOUD
(Loudness)
VOL ADJUST
(Volume adjust)
SUB. W
(Subwoofer)
SUB.W LPF *5
(Subwoofer low-
pass filter)
*1
The illumination control lead connection is required. (See "Installation/Connection Manual".)
This setting may not work correctly on some vehicles (particularly on those having a control
dial for dimming). In this case, change the setting to other than <DIMMER AUTO>.
*2
Some characters or symbols will not be shown correctly (or will be blanked) on the display.
*3
If you are using a two-speaker system, set the fader level to "00".
*4
This adjustment will not affect the subwoofer output.
*5
Displayed only when <SUB.W> is set to <ON>.
16
| ENGLISH
Selectable setting (Initial: [XX])
For settings,
page 4.
For settings,
page 13.
Selects the display and button illumination adjusted in the <BRIGHTNESS>/
<COLOR SETUP> setting.
[AUTO]: Changes between the Day and Night adjustments when you turn
off/on the car headlights. *1
ON: Selects the Night adjustments.
OFF: Selects the Day adjustments.
DAY [31]/NIGHT [15]: For settings,
[ONCE]: Scrolls the display information once.
AUTO: Repeats scrolling (at 5-second intervals).
OFF: Cancels.
[ON]: Shows the TAG information while playing MP3/WMA tracks.
OFF: Cancels.
For settings,
page 14.
R06 — F06 [00]: Adjusts the front and rear speaker output balance.
L06 — R06 [00]: Adjusts the left and right speaker output balance.
ON: Boosts low and high frequencies to produce a well-balanced sound at
a low volume level.
[OFF]: Cancels.
-05 — +05 [00]: Presets the volume adjustment level of each source,
compared to the FM volume level. Before adjustment, select the source you
want to adjust. ("VOL ADJ FIX" appears if "FM" is selected.)
OFF: Cancels.
[ON]: Turns on the subwoofer output.
LOW 55Hz/MID 85Hz/[HIGH 120Hz]: Audio signals with frequencies
lower than 55 Hz/85 Hz/120 Hz are sent to the subwoofer.
3 Repeat step 2 if necessary.
To return to the previous menu, press
To exit from the menu, press DISP or MENU.
page 14.
.
Publicité
