Keysight E36731A Manuel D'instructions page 83

Power Supply mode Load mode
Step 4 – Use the On key:
Once output delays have been set, press [On] to start the On delay and Off delay sequence.
From the remote interface:
To program turn-on and turn-off delays:
INP|OUTP:DEL:RISE 0.1, (@1)
INP|OUTP:DEL:FALL 0.2, (@1)
To include output 1 in a sequence:
INP|OUTP:COUP:CHAN CH1, (@1)
To turn on output in a sequence:
INP|OUTP ON, (@1)
Keysight E36731A User's Guide 83