Keysight E36731A Manuel D'instructions page 28

Fuse Information
The following table describes the fuse that you should use.
Fuse Description
part number
2110-1570 Fuse 6.3 A, 250 V, 5 x 20 mm Time Delay
To configure the correct fuse, follow the three steps shown below:
Turn the unit around and place
it on a hard, flat surface with its
rubber feet up. Locate the fuse
holder as shown in the image
above, and pull the fuse holder
out of instrument.
28
Fuse type
Cartridge
Remove the blown fuse and
insert the proper replacement
fuse into the fuse holder.
Re-insert the fuse holder into the
instrument. Place the unit back to
its proper orientation.
Keysight E36731A User's Guide