Keysight E36731A Manuel D'instructions page 18

Meter view
The instrument front panel features a high contrast 4.3-inch LCD color display. Press [Meter View].
Power Supply mode
Item
1 Instrument function status
Displays the selected instrument function mode: Power Supply or Load
2 Preferred mode status
Volt or Curr indicates the preferred mode for output on or output off transitions.
3 Remote sense status
2wire or 4wire indicates that 2-wire or 4-wire sensing measurement is in use.
4 Output status
OFF: The output is off
CV: The output is in constant voltage mode
CC: The output is in constant current mode
UR: The output is unregulated
5 Instrument/Interface status
: The instrument is connected to USB.
: The instrument is connected to LAN.
(blinking): The instrument is under identification mode via
remote interface.
6 Voltage slew
Displays the rising slew and falling voltage slew rate.
7 Output delay
Displays the OCP, Output On, and Output Off delay status/values.
8 Ratings and protection
Displays the present over-voltage protection (OVP) setting.
9 Soft front panel menu
18
Description
OV: Over-voltage protection is tripped
OC: Over-current protection is tripped
OT: Over-temperature protection is tripped
: The instrument is not connected to LAN.
(blinking): The LAN connection is at fault.
LIST1: Sequence List is running.
!ERR: An error has occurred (press Utilities > Error to view the
Error Log).
Keysight E36731A User's Guide