Sony HT-CT500 Mode D'emploi page 91

Masquer les pouces Voir aussi pour HT-CT500:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

5
X/x
Press
repeatedly to select the
desired setting, then press
• [AUTO]:
Normally select this. The
system changes [RF
Change] to [ON] or [OFF]
automatically.
• [ON]:
The system transmits sound
by searching for a better
channel for transmitting.
• [OFF]:
The system transmits sound
by fixing the channel for
transmitting.
6
Press GUI MENU.
The GUI menu turns off.
7
When you set [RF Change] to [OFF],
select the ID so that sound
transmission is most stable (page 85).
Notes
• In most cases, you will not need to change this setting.
– If [RF Change] is set to [OFF], transmission
between the subwoofer and S-AIR sub unit can be
performed using one of the following channels.
– S-AIR ID A: equivalent channel for IEEE 802.11b/
g channel 1
– S-AIR ID B: equivalent channel for IEEE 802.11b/
g channel 6
– S-AIR ID C: equivalent channel for IEEE 802.11b/
g channel 11
• The transmission may be improved by changing the
transmission channel (frequency) of the other wireless
system(s). For details, refer to the operating
instructions of the other wireless system(s).
Stabilizing S-AIR reception
.
Read the following when S-AIR reception is
poor or unstable.
Confirm the wireless adapters are inserted
correctly (page 83).
Confirm that the S-AIR IDs of the S-AIR
main unit and sub unit are the same
(page 85).
About environments where S-AIR
products (S-AIR main unit and sub
unit) are used
S-AIR products use a radio frequency of 2.4
GHz. Certain electronic equipment or other
factors may cause lost connection or instability
in S-AIR reception.
Electronic equipment influence
The following may cause interference or cross
talk.
– Cellular phones, cordless phones
– Wireless LAN, personal computers
– Game machines using radio signals
– Microwave ovens
Other factors
The following may cause poor reception.
– Materials or structures, such as walls and
floors
– The location where an S-AIR product is
placed
When using S-AIR products, place them as far as
possible from the above electronic equipment, or
place where S-AIR reception is stable.
continued
91
GB

Publicité

Chapitres

Table des Matières
loading

Table des Matières