Sony HT-CT500 Mode D'emploi page 87

7
Select the desired function on the
S-AIR receiver.
x When [Party] is set
The S-AIR receiver's function changes
sequentially as you press INPUT
SELECTOR of the main unit (page 45) or
S-AIR CH of the S-AIR receiver.
x When [Separate] is set
The S-AIR receiver's function changes by
pressing S-AIR CH of the S-AIR receiver as
follows.
"MAIN UNIT" t "TUNER FM" t
"TUNER AM" t "DMPORT" t ...
To enjoy the same function as the
subwoofer, select "MAIN UNIT."
When "TUNER FM" or "TUNER AM" is
selected on the subwoofer, you can only
select the same band for the tuner on the
S-AIR receiver. When you select other than
"TUNER FM" or "TUNER AM" on the
subwoofer, you can select any band for the
tuner on the S-AIR receiver.
8
Adjust the volume on the S-AIR
receiver.
Note
• When the sound is other than 2 channel stereo,
multi-channel sound is downmixed to 2 channel.
To control the system from the
S-AIR receiver
You can control the system from the S-AIR
receiver by using the following buttons.
Press Operation
N, X, x, Share the same operations on the
./>
remote.
S-AIR CH Change the function of the system.
For details, refer to the operating instructions of
the S-AIR receiver.
Enjoying the S-AIR receiver
while the subwoofer is in
standby mode
You can enjoy the S-AIR receiver while the
subwoofer is in standby mode by setting [S-AIR
Standby] to [ON].
DISPLAY
C, X, x, c,
HOME
RETURN/
EXIT MENU
PRESET
TUNING
1
Press GUI MENU.
"GUI MENU" appears in the front panel
display of the subwoofer and the GUI menu
appears on the TV screen.
2
X/x
Press repeatedly to select
[Settings], then press
The settings menu appears.
3
X/x
Press repeatedly to select [S-AIR],
then press .
The S-AIR menu appears.
Note
• When the S-AIR transmitter (not supplied)
is not inserted into the subwoofer, [S-AIR]
cannot be selected.
4
X/x
Press repeatedly to select [S-AIR
Standby], then press
GUI
GUI MENU
MENU
TOOLS/
OPTIONS
PRESET
TUNING
c
or .
.
continued
87
GB