Sony HT-CT500 Mode D'emploi page 88

5
X/x
Press to select the desired setting,
then press .
• [ON]: You can enjoy the S-AIR
receiver while the
subwoofer is in standby
mode or turned on. The
power consumption during
the standby mode
increases.
• [OFF]: You cannot enjoy the
S-AIR receiver while the
subwoofer is in standby
mode.
6
Press GUI MENU.
The GUI menu turns off.
Note
• When you turn the system off while [S-AIR
Standby] is set to [ON], the POWER /
ACTIVE STANDBY indicator in the front
panel display lights up in amber.
88
GB
Identifying the subwoofer
with a specific S-AIR sub unit
(Pairing operation)
It is easy to set the same ID for the subwoofer
and an S-AIR sub unit to establish sound
transmission. However, neighbors may also
receive your system's sound if IDs are the same,
or you may receive sound from neighbors. To
prevent this, you can identify the subwoofer with
a specific S-AIR sub unit by performing the
pairing operation.
x Before pairing
Sound transmission is established by ID
(example).
Your room
This subwoofer
ID A
ID A
S-AIR sub unit
Neighbor
ID A
S-AIR sub unit