JVC KD-AR7000 Manuel D'instructions page 50

• Elapsed playing time is not correct.
] This sometimes occurs during play. This is
caused by how the tracks are recorded on
the disc.
• "Not Support" appears and tracks skip.
] Tracks are not encoded in an appropriate
format.
] Copy-protected WMA tracks cannot be
played back.
• "No Files" appears for a while, then the
disc ejects.
] The current MP3/WMA disc does not
contain any MP3/WMA tracks.
• "No Music" appears.
] No MP3/WMA tracks are included in the
folder. Skip the folder.
] Only <jcl> and/or <jca> files are recorded
on the disc.
• Correct characters are not displayed (ex.
album name).
] This unit can only display a limited
number of special characters (see the
tables on page 48).
Sound adjustments
• CCC, BBE, and preset sound modes (EQ)
cannot be used.
] These sound adjustments cannot be
adjusted when "V.Cancel" is selected for
the DSP mode.
Graphics
• Download does not seem to finish.
] If you are trying to download an
animation of many frames, it takes a quite
long time (see page 47).
• Animation does not move.
] Temperature in the car compartment is
very low. Wait until the operating
temperature resumes.
About mistracking:
Mistracking may result from driving on extremely rough roads. This does not damage the unit
and the disc, but will be annoying.
It is recommended to stop disc play while driving on such rough roads.
50
Preferred Setting Modes—PSM
• You cannot select an image for "Picture"
and an animation for "Movie."
] You can select an image only after
downloading the appropriate files in
memory.
External component operations
• The external component you want is not
selected for the playback source.
] Select the appropriate source for the
"EXT Input" setting.
CD changer operations
• "No Magazine" flashes.
] Magazine is not loaded in the CD
changer.
• "No Disc" flashes.
] No discs are in the magazine or the discs
are inserted upside down.
• "Reset 01" — "Reset 07" flashes.
] The built-in microcomputer in the CD
changer is malfunctioning. Press the reset
button of the CD changer.
• "Reset 08" flashes.
] This unit is not connected to a CD
changer correctly. Connect this unit and
the CD changer correctly and press the
reset button of the CD changer.