JVC KD-AR7000 Manuel D'instructions page 25

To adjust fader and balance—Fad/Bal:
Adjust fader—speaker output balance between
the front and rear speakers.
• Upmost—front only
• Downmost—rear only
Adjust the balance—speaker output balance
between the left and right speakers.
• Leftmost—left only
• Rightmost—right only
To adjust subwoofer output—Sub Out:
Select an appropriate cutoff frequency level
according to the subwoofer connected.
High: Frequencies higher than 115 Hz are
cut off to the subwoofer.
Middle: Frequencies higher than 85 Hz are cut
off to the subwoofer.
Low: Frequencies higher than 55 Hz are cut
off to the subwoofer.
Adjust the subwoofer output level.
• 0 (min.) to 8 (max.)
To adjust the input level of each source
—VolAdjust:
This setting is required for each source except
FM. Before making an adjustment, select an
appropriate source for which you want to make
an adjustment.
Once you have made an adjustment, it is
memorized, and the volume level will
automatically increase or decrease by adjusted
level whenever you change the source.
Adjust to match the input level to the FM sound
level.
• –5 (min.) to +5 (max.)
25