Publicité
C-Qual™
2.
Position tilting board:
WARNING
Ensure tilting board is fixed properly before placing patient.
l
For 5°, 7.5°, 10°, 12.5°, 15° angles lift low angle support and secure tilting
board into appropriate location.
3.
Position head support as needed (H1-H5).
4.
Slide or lift on bottom stop to achieve appropriate location (B1-B13).
5.
Adjust upper arm support position:
Loosen upper arm support lower knob to rotate arm
support to desired location (A-P).
For 17.5°, 20°, 22.5°, 25° angles lay low angle support onto lower board.
Separate high angle support from tilting board and select appropriate
Slide upper arm support for appropriate horizontal
position (T-Z). Tighten upper arm support lower knob.
3
location along lower board.
Loosen upper arm support upper knob. Adjust angle of arm
support by moving knob along curved scale to appropriate
I.
Sure-Set Angulation -
Low Angle Support
II.
Sure-Set Angulation -
High Angle Support
position (1-12). Tighten knob.
English
Publicité
