Bosch Power Xpress Instructions D'installation Et D'utilisation page 20

en | 1 8 | Installation and Operating Instructions | Power Xpress Charge Station
ss01438
25. Reinstall strain relief and torque screws to 4 Nm
(35 in-lb).
Note:
Select appropriate orientation of insert to achieve prop-
er clamping.
CAUTION: Do not overtighten.
ss01491
26. Securely tighten the cable gland and torque to
6.8-7.9 Nm (60-70 in-lb).
27. Secure the Charge Station to the mounted wall
bracket by engaging the tabs on the Charge Station
into the slots on the wall bracket. Press firmly and
slide the Charge Station down until fully seated on
the bracket.
28. Attach the wiring chamber lid with four (4) 3/4-in.
(20-mm) square-drive screws.
29. Apply the self-adhesive chamber lid label.
578987 | REV. A | 15.06.2016
ss01496
30. Plug Charge Station plug into NEMA outlet.
Bosch Automotive Service Solutions Inc.