Dustbane Integra Scrub Manuel De Pièces Et D'opérations page 5

Transport of Machine
To transport this machine, the following procedure is advised:
•
Unplug machine from power source.
• Always leave a pad on the machine to protect the grip face from damage in transport and storage.
• Wrap cord using cord wrap and handle.
• Raise handle adjustment lever and lock into the transport notch in an upright position.
• Tilt machine onto wheels and transport slowly.
• Dustbane recommends that at least two-person lift when picking up the machine. With one user on each side of the ma
chine, place one hand on machine axle and one hand around the front base of the machine. Lift machine, making sure to
bend at the knees.
• Secure machine when transporting in a vehicle to prevent movement. Caution: This machine is very heavy. Get assistance
when lifting. Do not attempt to lift alone.
General Operating Instructions
1. Move machine to work location. Never operate, transport, or store the machine without a pad to protect the grip face.
2. Plug machine into grounded power outlet.
3. Stand behind the Integra and place your hands on the padded grips.
4. Gently squeeze the coated metal handle underneath the hand grips to engage the motor. Depending on the pad configuration,
the machine may initially pull in one direction. This is normal and you will be able to quickly steady the machine.
5. Begin moving forward in straight lines.
6. If the handle is too tall, disengage the handle lock mechanism and slide the handle toward you until you find a comfortable
height. Lock the handle into that position either with your hand or press firmly with your foot.
7. Continue moving in straight lines, checking your pad every 15 to 30 minutes (depending on pad in use) to maintain optimum
performance.
Important
To reduce the risk of fire, electric shock or injury:
• Never leave the machine unattended while power cord is connected.
• Always wear personal protective equipment (PPE) when operating this machine.
• Never inhale dust created by the use of this machine. Any modifications to this machine may result in damage to the
machine or injury to the operator or others nearby. Alterations to the machine will also void any and all warranty and
liabilities.
• Sanding wood decks is not recommended by Dustbane due to uneven surfaces which could lead to damage to the
machine. Some pressure treated wood found in decking contains arsenic that, when sanded, will create hazardous dust.
Dustbane assumes no liability if the machine is used on decks, and damage caused from sanding pressure treated
wood will not be warranted.
• Do not operate this machine around fuels, solvents, flammable floor finishes, thinners, wood particulate or any flammable
materials. Cigarette lighters, pilot lights, electrical sparks and all other sources of ignition should be extinguished or
avoided. Work areas should be well ventilated.
• Keep the power cord clear of the pad. Always lift the cord over the machine. Do not pull on thepower cord in an attempt
to move the machine. This could result in electrocution.
• Do not use machine if it has been sprayed with water or left out in the rain. This could result in a shock injury or
electrocution.
• Keep feet, hands, and loose clothing away from any moving parts on the machine to avoid injury. Disconnect power cord
before changing the pad or when servicing. Damage can occur to the machine or to other property if instructions in the
owner's manual are not followed.
• Do not operate this machine while under the influence of alcohol or other drugs.
• Never allow children under age 18 to operate this machine.
• Unplug machine from power source before adjusting height of handle or changing pad.
All manuals and user guides at all-guides.com
5