Déclaration De Conformité - Bosch Rexroth Hägglunds VI Manuel D'installation Et De Maintenance

Table des Matières

Publicité

7 Déclaration de conformité
Exemple de Déclaration de conformité délivrée par Hägglunds Drives AB
Declaration of Incorporation of partly completed machinery
As defi ned by the EC Machinery Directive 2006/42/EC, Appendix II B
The manufacturer
Hägglunds Drives AB
hereby declares that the partly completed machinery
Name:
Viking
Function:
Hydraulic motor
Model:
Viking
Type:
Viking
Trade name: Viking
satisfi es the following essential requirements of Machinery Directive 2006/42/EC in
accordance with the chapter numbers in Appendix I:
General principle no. 1.
1.1.3
1.1.5
1.3.1
1.5.5
1.5.6
1.5.8
The requirements are fulfi lled provided that the data in the product documentation (fi tting instructions, operat-
ing instructions, project management and confi guration documents) are implemented by the product user. The
requirements of Appendix I to Machinery Directive 2006/42/EC not mentioned here are not applied and have
no relevance for the product.
It is also declared that the special technical documents for this partly completed
machinery have been compiled in accordance with Appendix VII, Part B. These are trans-
ferred on request to the market surveillance body in paper-based/electronic format.
Conformity with the provisions of further EU Directives, Standards or Specifi cations:
SS-EN 982
SS-EN ISO 12100-1
SS-EN ISO 12100-2
The partly completed machinery may only be put into operation when it has been
established that the machine into which the partly completed machinery is to be
incorporated conforms to the provisions of EC Machinery Directive 2006/42/EC,
where relevant according to this directive.
The individual below is authorized to compile the relevant technical fi les:
Name:
Björn Leidelöf
Address:
Hägglunds Drives AB, S-890 42 Mellansel
We reserve the right to make changes to the content of the Declaration of Incorporation. Current issue on request.
La déclaration de conformité ci-dessus est disponible sur demande pour les
fournitures de Hägglunds Drives AB. Cette déclaration existe aussi traduite en
d'autres langues.
Hägglunds VI, FR 323-3br/2011, Manuel d'installation et de maintenance, Bosch Rexroth Mellansel AB
Déclaration de conformité
1.3.2
1.3.3
1.3.4
1.3.6
1.3.7
1.5.13
1.6.1
1.6.3
1.7.2
1.7.3
Mellansel, 2009-12-29
1.5.3
1.5.4
1.7.4
67/72

Publicité

Table des Matières
loading

Table des Matières