Publicité
Les langues disponibles
Les langues disponibles
Fuel filter
• Open the fuel tank cap, use a wire hook and pull out the
suction head through the tank opening.
• Replace the fuel filter if it is hardened, contaminated or
clogged.
Air filter
• Remove the air filter cover, then carefully remove the
filter element.
• Clean the air filter chamber with a damp cloth.
• Clean the filter element with warm soapy water as
required. Dry completely before installation.
• Replace the filter element if damaged or deformed.
• Restore the filter element and replace the air filter cover.
• WARNING! Do not clean with gasoline and any flamable
solvents.
Spark plug (replacement model BM6A)
• Make sure the engine is completely stopped and cooled
down.
• Remove the spark plug with a suitable spark plug
wrench.
• Visually inspect the spark plug for any sign of worn or
damage. If yes, replace with a new one.
• The desired plug gap is between 0,60 to 0,70 mm.
• Install and tighten the spark plug with torque between
9,8 to 13,7 Nm.
Spark arrester
• Make sure the engine is completely stopped and cooled
down.
• Periodically check and clean the spark arrester with a
wire brush.
Fig. 7
Fig. 8
Fig. 9
Fig. 10
Page 21 / 35
Publicité
