Publicité
Les langues disponibles
Les langues disponibles
check the area for signs of life, particularly long grass and under bushes. Relocate, if
necessary.
IV. GETTING STARTED
Unpacking
• Remove the product from carton and discard all packaging properly.
• Check if the product and accessories (if any) are intact.
• If any parts are missing or damaged, do not assemble or operate the machine until the
part has been replaced or the fault has been rectified.
• Apart from the hedge trimmer, a tool kit is included. (Fig. 2)
-
1 Fuel mixing bottle
-
3 Hex keys
-
1 Box spanner
-
1 Spanner
-
1 Screwdriver
V. OPERATION
5.1- Intended use
• The hedge trimmer is designed for only the purpose of trimming bushes, hedges, shrubs,
and similar materials. It must not be used for any other applications. Do not abuse the
machine.
• The product is intended for outdoor domestic use in private gardens.
• Do not use the product for artisanal, industrial, professional and / or commercial
applications (e.g. in construction sites, public parks, forest...).
5.2- Before starting engine
• The machine is equipped with a 2-stroke air cooled gasoline engine that requires a
mixture of gasoline and oil. The recommended fuel mixing ratio is: gasoline 25 : oil 1.
• DO NOT smoke. Keep any open flame away.
• Gasoline: either lead or unlead, alcohol-free.
• Motor oil: quality proven 2-stroke motor oil.
Fuelling
• Transfer approximate 25mL of motor oil into the provided mixing bottle.
• Transfer gasoline into the mixing bottle until the level mark of 600mL.
• Replace the bottle cap and mix well the fuel/oil mixture.
• Remove the fuel tank cap (2) and completely transfer the fuel/oil mixture into the fuel
tank (3) with aid of a funnel.
• Wipe any spilled gasoline with a damp cloth.
• Replace the fuel tank cap.
Fig. 2
Page 17 / 35
Publicité
