Adjusting The Harness; Setting The Working Height - Husqvarna 535FBX Manuel D'utilisation

Adjusting the harness

• Put on the harness.
• Tighten the waist strap so that it sits securely.
• Tighten the chest strap.
• Adjust the chest strap vertically if needed and make
sure it fits well.
• Adjust the shoulder straps to distribute the load evenly
across your shoulders.
• Loosen or tighten the waist strap so that approx. 70%
of the load is on your waist and 30% on your
shoulders.
66 – English
ASSEMBLY

Setting the working height

• Pull out the cord to the desired length and fasten as
shown.
• Fasten the knot on the cord in the suspension ring on
the shaft. You can also make more knots on the cord
so that you are able to easily change between
different working positions.
• To shorten the cord, loosen it from the load reducer
and slacken it, which will make the cord spring back
automatically.
1
2