Oase InScenio EGC Notice D'emploi page 54

- EN -
7.3 "Settings" screen
"Settings" screen
1
Use the button
mode, the smartphone/tablet is directly connected to the InScenio EGC Controller via the WLAN "Oase
EGC Controller <xxxxxx>".
Network name (SSID)
The device makes a wireless network (WLAN) available under the specified network name with which
the smartphone/tablet is directly connected.
The network name in the factory default settings is specified on the InScenio EGC Controller on the
adhesive label.
The network name is changed via the touch symbol
to the unit and are preset.
WiFi password
The password "oase1234" of the factory setting is specified on the InScenio EGC Controller on the
adhesive label.
The WLAN password of the direct WLAN connection (Access Point) is changed using the touch sym-
bol
WiFi channel
If the set channel is fully utilised by other wireless devices, it is possible to use a different channel.
It may be possible to remedy malfunctions of the WLAN connection by selecting a different channel.
54
to start the InScenio EGC Controller in access point mode. In this
.
. The last six characters "xxxxxx" are specific
EGC0018