Oase InScenio EGC Notice D'emploi page 52

- EN -
3. Tap to add the device.
The device has been added to the device list.
4. To give the added device a name, switch to the device overview.
5. Select the desired device in the device overview and tap
A dialogue field will open.
6. Enter the device name and confirm with "OK".
The device name has been assigned.
If there are several devices of one type, repeat the process for each device.
7.2.2 ProfiClear Premium Filter – upgrade to EGC
"My devices" screen
To connect a ProfiClear Premium filter with the InScenio EGC Controller, ensure that the control system is
EGC-compatible. For older ProfiClear Premium filters this compatibility can be established with a separately
available upgrade control system (article number 47723).
Prerequisite for a connection between ProfiClear Premium filter and InScenio EGC Controller:
The ProfiClear Premium is correctly connected to the control system with the EGC box.
The ProfiClear control system is correctly connected to the InScenio EGC Controller with the EGC connection
cable.
The ProfiClear control system is switched on (connection with the mains is established).
1 ProfiClear Controller Upgrade
First select and add the ProfiClear Controller.
2 ProfiClear Premium variants
Secondly, select the desired ProfiClear Premium variant and add it to the device list. The filter is auto-
matically calibrated for the control system.
52
.
EGC0016