Oase InScenio EGC Notice D'emploi page 46

- EN -
7.1.2 Operating ProfiClear units via EGC
"Home" screen
The OASE product name will be displayed at the top right of the screen. The added device can be labelled
with an individual name.
1 Tiles for operation and display of current values.
Swipe vertically across the tiles to display additional tiles.
2 Switching the device on or off.
Tap the touch symbol "On" to switch on the device.
Tap the touch symbol "Off" to switch off the device.
3 Status display of the EGC connection
Status display lights up green:
The connection between the EGC device and InScenio EGC Controller is active.
Status display lights up grey and the product image is greyed out:
No connection between EGC device and InScenio EGC Controller.(→ Remedy of faults)
4 Display of system messages
Shows the last system message.
Touch the system message and hold for 1 second to display all systems messages and reset.
A dialogue window opens and lists all system messages that have occurred.
When the cause has been remedied, the system messages are extinguished automatically or have to
be confirmed via the dialogue field.
The operating instructions of the ProfiClear unit contains detailed descriptions about possible causes
and remedy.
46
FMR0039