Oase InScenio EGC Notice D'emploi page 40

- EN -
6 Commissioning/start-up
Proceed as follows for starting up:
1. Install the app on your smartphone/tablet. (→ Installing the "OASE Easy Control" app )
2. Connect the InScenio EGC Controller to the power supply. (→ Connecting the power supply)
3. Establishing a WLAN connection and setting a device password (→ Establishing a WLAN connection)
6.1 Installing the "OASE Easy Control" app
iOS Android
6.2 Establishing a WLAN connection
To establish a WLAN connection it is necessary to select one of the two connection types:
WLAN connection
Connect the InScenio EGC Controller and
smartphone/tablet to the router of your home net-
work.
Directly connecting the InScenio EGC Controller
and smartphone/tablet
6.2.1 Establishing a connection to the WLAN router via WPS (router/cloud mode)
WPS (Wi-Fi Protected Setup) is a standard for establishing a secure WLAN connection at the touch of a but-
ton. This method is recommended in order to quickly and easily establish a WLAN connection between the
InScenio EGC Controller and the router.
In this case it is not necessary to enter the network name (SSID) and password.
The WLAN router must support WPS.
Prerequisite:
The range of the WLAN connection between the router and InScenio EGC Controller can span a distance of up
to 80 m provided there is unobstructed signal transmission and there are no sources of interference.
Compatibility with the following WLAN standards: 802.11n+g+b
Exclusively in the frequency range 2.4 GHz.
40
How to proceed:
1. Open Google Play or App Store.
2. Search for the ʺOASE Easy Controlʺ app and install.
Follow the instructions during installation.
3. Confirm the query "access to internal data of the unit".
If access is permitted, individual product photos can be uploaded.
The query appears during installation (Android) or when executing the app ((iOS).
The app appears on the display after successful installation.
Description
The smartphone/tablet stays connected to the router.
EGC-compatible end devices can be controlled via the
OASE web portal (only InScenio EGC Controller Cloud)
The smartphone/tablet can access the internet.
EGC controller and smartphone/tablet are not connected
to the home network.
EGC-compatible end devices cannot be controlled via the
OASE web portal.
Smartphone/tablet cannot access the internet.
How to proceed
(→ Establishing a connection to
the WLAN router via WPS
(router/cloud mode))
Alternatively:
(→ Manually establishing a con-
nection to the WLAN router
(router/cloud mode))
(→ Establishing a direct WLAN
connection (access point mode))