Folding The Treadmill - Techness RUN 200 TOUCH Mode D'emploi

FOLDING THE TREADMILL

1. Restore the incline to flat (0) position.
2. Unplug it from power point before folding
3. Lift the deck until it's parallel to the upright post and the cylinder locks into position
4. Caution: check to ensure cylinder locking device has been engaged
UNFOLDING THE TREADMILL
1. Place one hand on handle bar; use the other to push the top of the running deck forward
2. Press one foot on the middle section of the cylinder to disengage the locking mechanism
3. Allow the deck to begin slowly dropping before releasing your hands
MOVING THE TREADMILL
The treadmill can be moved around in the house safely in its fold-up position by using the
transport wheels
Firmly hold onto the handle bars with both hands, pull the treadmill towards you, and then
while it's on wheels, drag or push it slowly
FLEXIBLE TUBE
Transportation wheel
74