Folding The Treadmill - Techness RUN 800 Manuel D'utilisation

SETTING UP YOUR TREADMILL
1. FOLDING/UNFOLDING & MOVING THE TREADMILL

FOLDING THE TREADMILL:

1. Unplug from power point before folding
2. Restore incline to flat (0) position
3. Lift deck until it's parallel to the upright post and cylinder locks into position
4. Caution: Ensure cylinder locking device has engaged
Joint & Check Valve
Soft drop
UNFOLDING THE TREADMILL：
1. Make sure the place is 1 meter far away from the power point and flat no trucking.
2. Place two hands on handle bar, and Press one foot on the middle section of the cylinder to dis-
engage the locking mechanism. Both hands press down, and the base frame can down slowly.
When the deck place 1 meter away from the grand, the deck can down itself. Then we can away
from the treadmill until it unfolds completely to the grand.