Techness RUN 800 Manuel D'utilisation page 76

General Functionalities
◆ To start any workout phase after the setup, the user has to press the Start key.
◆ If the user presses the Stop key during the workout phase, the workout pulses.
◆ If the user presses the Stop key twice, the workout terminates and the system will return to the
initial state.
◆The Quick keys, Incline adjusting keys, Speed adjusting keys, and Start key only work during
the workout period. These keys do not work during the setup stage.
◆ The Direction keys only work during the setup stage. The user may use the direction keys to
choose their desired workout program, as well as adjusting value. These keys do not work during
the workout phase.
◆Hand pulse in front of the user will read the user's heart rate when both keypads are held
properly.
◆ Pull out the safe key will stop the treadmill immediately.