Techness RUN 200 TOUCH Mode D'emploi page 65

Special Safety Precautions
●Power source:
● when placing the treadmill, choose a place in reach of a socket.
●Always connect the appliance to a socket with a grounded circuit and no other appliances
connected to it. It is recommended not to use any extension cords.
●A faulty grounding of the appliance can cause the risk of electrical shocks. Ask a qualified
electrician to check the socket in case you do not know if the appliance is grounded
appropriately. Do not modify the plug provided with the appliance if it is not compatible with
your socket. Ask a qualified electrician to install a suitable socket.
●Sudden voltage fluctuations can seriously damage the treadmill. Weather changes or
switching on and off other appliances can cause peak voltages, over-voltage or interference
voltage. To limit the danger of damage to the treadmill, it should be equipped with an
over-voltage protective device (not included).
●Keep power cord away from the transport wheels whilst repositioning the device. Do not
leave the power cord below the running belt. Do not use the treadmill with a damaged or worn
out power cord.
●Ensure you unplug before cleaning or engaging in maintenance work. Maintenance should
only be done by authorized service technicians, unless otherwise stated by the manufacturer.
Ignoring those instructions would automatically void the warranty.
●Inspect the treadmill before every use to make sure that every part is operational.
●Do not use the treadmill outdoors, in a garage or under any kind of canopy. Do not expose
the treadmill to high humidity or direct sunlight.
●Never leave the treadmill unattended.
Make sure the running belt is always tense. Start the running belt before stepping on it.
65