DeWalt DC413 Traduction De La Notice D'instructions Originale page 62

All manuals and user guides at all-guides.com
ENGLISH
WARNING: Never use solvents or
other harsh chemicals for cleaning the
non-metallic parts of the tool. These
chemicals may weaken the materials
used in these parts. Use a cloth
dampened only with water and mild
soap. Never let any liquid get inside the
tool; never immerse any part of the tool
into a liquid.
CHARGER CLEANING INSTRUCTIONS
WARNING: Shock hazard. Disconnect
the charger from the AC outlet before
cleaning. Dirt and grease may be
removed from the exterior of the charger
using a cloth or soft non-metallic brush.
Do not use water or any cleaning
solutions.
Optional Accessories
WARNING: Since accessories, other
than those offered by D
not been tested with this product, use
of such accessories with this tool could
be hazardous. To reduce the risk of
injury, only D WALT, recommended
E
accessories should be used with this
product.
WARNING: Accessories must be rated
for at least the speed recom mended on
the tool warning label. Wheels and other
accessories running over their rated
accessory speed may fly apart and
cause injury. Threaded accessories
must have a M14 hub. Every
unthreaded accessory must have a
22.2 mm (7/8") arbor hole. If it does not,
it may have been designed for a circular
saw. Accessory ratings must always
be above tool speed as shown on tool
nameplate.
It is important to choose the correct guards, backing
pads and flanges to use with grinder accessories.
Consult your dealer for further information on the
appropriate accessories.
60
ACCESSORY TABLE
d
D
D
d
b
D
D
WALT, have
E
Protecting the Environment
Separate collection. This product must
not be disposed of with normal
household waste.
Should you find one day that your D
needs replacement, or if it is of no further use to you,
do not dispose of it with household waste. Make this
product available for separate collection.
Separate collection of used products and
packaging allows materials to be
recycled and used again. Re-use of
recycled materials helps prevent
environmental pollution and reduces
the demand for raw materials.
Local regulations may provide for separate collection
of electrical products from the household, at
municipal waste sites or by the retailer when you
purchase a new product.
D WALT provides a facility for the collection and
E
recycling of D
reached the end of their working life. To take
advantage of this service please return your product
to any authorised repair agent who will collect them
on our behalf.
Max. Min. Periphical Threaded
[mm]
Rotation speed hole length
[mm]
-1
[min. ] [m/s]
D b d
125 6 22.23 11000 80
b
125 - - 11000 80
75 30 M14 11000 45
125 12 M14 11000 80
WALT product
E
WALT products once they have
E
[mm]
-
-
18.0
18.0