Installation Steps; Care And Cleaning - AVS Bugflector Instructions D'installation

Installation Steps

Press (6) hood inserts into hood at the loca-
tions identified in Step 2.
3
Secure hood shield to hood with a screw and washer at each hole location.
5
Close hood. Apply bump ons to surface
6

Care and Cleaning

• Wash only with mild soap & dry with a clean cloth.
Congratulations!
You have purchased one of the many quality Auto Ventshade™ branded products offered by Lund International, Inc. We take the utmost pride in our
products and want you to enjoy years of satisfaction from your investment. We have made every effort to ensure that your product is top quality in
terms of fit, durability, finish and ease of installation.
™
Auto Ventshade
NOTE: Actual application may vary slightly from illustrations.
of hood
Lund International, Ventshade Accessories Division
655 Raco Drive, Lawrenceville, GA 30045
800-241-7219 • Fax 770-339-5839 • Visit us at lundinternational.com
© 2010 Lund International, Inc. All rights reserved.
, the Auto Ventshade logo, Chromeflector
TM TM
Center part on front edge of hood and align holes in
hood shield with the previously installed Inserts.
4
Hood
Hood insert
Hood shield
Washer
7
, and the AVS logo are trademarks of Lund International, Inc.
TM TM
Page 2 of 2
Screw