Installation Steps; Care And Cleaning - AVS Bugflector Serie Instructions D'installation

Installation Steps

Set the hood shield in place.
3
Insert (2) fasteners through hood shield and into the
outboard holes in hood.
5

Care and Cleaning

• Wash only with mild soap & dry with a clean cloth.
Congratulations!
You have purchased one of the many quality Auto Ventshade™ branded products offered by Lund International,
Inc. We take the utmost pride in our products and want you to enjoy years of satisfaction from your investment.
We have made every effort to ensure that your product is top quality in terms of fit, durability, finish and ease of
installation.
™
Auto Ventshade
NOTE: Actual application may vary slightly from illustrations.
hood shield
Lund International, Ventshade Accessories Division
655 Raco Drive, Lawrenceville, GA 30045
800-241-7219 • Fax 770-339-5839 • Visit us at lundinternational.com
© 2011 Lund International, Inc. All rights reserved.
, the Auto Ventshade logo, Chromeflector
TM TM
Using a phillips screwdriver install (2) screws with (2)
washers to the two (2) inboard holes through the hood
4
Install bump ons at pre-cleaned locations on the
6
7
, and the AVS logo are trademarks of Lund International, Inc.
TM TM
Page 2 of 2
inserts.
square hole
hood
hood insert
hood shield
washer
screw
DO NOT OVER TIGHTEN
painted hood/fender surface.