Publicité
Les langues disponibles
Les langues disponibles
Installation Steps
Align hood shield on hood. With hood shield in its final
position, apply pressure to the tabs to secure the tape to
3
Secure the hood shield to the hood with (4) screw
5
Care and Cleaning
•
Wash only with mild soap & dry with a clean cloth.
Congratulations!
You have purchased one of the many quality Auto Ventshade™ branded products offered by Lund International, Inc. We take the utmost
pride in our products and want you to enjoy years of satisfaction from your investment. We have made every effort to ensure that your
product is top quality in terms of fit, durability, finish and ease of installation.
Auto Ventshade
NOTE: Actual application may vary slightly from illustrations.
the hood.
fasteners.
Lund International, Ventshade Accessories Division
655 Raco Drive, Lawrenceville, GA 30045
800-241-7219 • Fax 770-339-5839 • Visit us at lundinternational.com
© 2005 Lund International, Inc. All rights reserved.
, the Auto Ventshade
logo and the AVS
TM
TM
Using a 1/4" drill bit, drill (4) holes into the underside
of the hood at the predrilled locations on the hood
4
Apply 4 bump on's to hood surface.
6
logo are trademarks of Lund International, Inc.
TM
Page 2 of 2
shield.
Publicité
