AVS Aeroskin LightShield Instructions D'installation

For proper installation and best possible fit, please read all instructions BEFORE you begin.
For technical assistance or to obtain missing parts, please call Customer Relations at 1-800-241-7219.
Important Safety Information
• CAUTION - Before driving, ensure that the LightShield is properly secured to vehicle.
• Do not use automatic "brush-style" car washes.
• Do not use cleaning solvents of any kind.
• Periodically check all components for tightness.
Contents
NOTE: Actual product may vary from illustration.
Tools Required
Car Wash Supplies
Preparation Before Painting / Installation
• A trial fit is recommended to ensure proper positioning and fit.
• Check fit of parts before painting as we will not accept the return of modified or painted parts.
• Wash and dry your vehicle to remove any debris and/or dirt from the installation area.
NOTE: Ensure vehicle surface and part are between 60°F and 80°F (15°C and 27°C) prior to
installation.
Do not drive vehicle for 24 hours after installation.
Installation Instructions
Aeroskin LightShield
LightShield
Foam Tab
x1
Clean Towel
Page 1 of 6
I - Sheet Number ASK03 Rev.B
™
Alcohol
Pad x6
Wire Connector
x2
Masking Tape Wire Stripping Tool
Do not wash vehicle for 72 hours after installation.
Surface Wire Stay
Prep x1 x6
Light strip
x1
Grease Pencil
27°C 80°F
15°C 60°F