AVS Bugflector Instructions D'installation

Bugflector
For proper installation and best possible fit, please read all instructions BEFORE you begin.
For technical assistance or to obtain missing parts, please call Customer Relations at 1-800-241-7219.
Important Safety Information
• CAUTION - Before driving, ensure that the hood shield is properly secured to vehicle.
• Do not use automatic "brush-style" car washes.
• Do not use cleaning solvents of any kind.
• Periodically check all components for tightness.
Contents
NOTE: Actual product may vary from illustration. Some applications will not require the use of all
mounting hardware.
Hood shield
Tools Required
Car Wash Supplies
Preparation Before Painting / Installation
• A trial fit is recommended to ensure proper positioning and fit.
• Check fit of parts before painting as we will not accept the return of modified or painted parts.
• Wash and dry your vehicle to remove any debris and/or dirt from the installation area.
Installation Steps
1
Installation Instructions
®
- Bugflector II
Clean Towel
NOTE: Actual application may vary slightly from illustrations.
Open hood.
® ®
- Carflector - Chrome Hood Shield
Alcohol pad x2 Self Tapping screw x2
Bump On x4
(98024)
Phillips
screwdriver
Remove (2) plastic seal retaining fasteners that align with the pre-
drilled holes and flanges in the hood shield. Next, carefully separate
the hood seal / gasket from the areas of the hood that align with the
2
NOTE: Exercise extreme caution not to tear or damage
the hood seal / gasket when separating from hood.
Page 1 of 3
I - Sheet Number BF139 Rev.-
Aluminium Flat
Washer x2
hood shield tabs.
™