AVS Bugflector Instructions D'installation

Bugflector
For proper installation and best possible fit, please read all instructions BEFORE you begin.
For technical assistance or to obtain missing parts, please call Customer Relations at 1-800-241-7219.
Important Safety Information
• CAUTION - Before driving, ensure that the hood shield is properly secured to vehicle.
• Do not use automatic "brush-style" car washes.
• Do not use cleaning solvents of any kind.
• Periodically check all components for tightness.
Contents
NOTE: Actual product may vary from illustration.
Tools Required
Preparation Before Painting / Installation
• A trial fit is recommended to ensure proper positioning and fit.
• Check fit of parts before painting as we will not accept the return of modified or painted parts.
• Wash and dry your vehicle to remove any debris and/or dirt from the installation area.
Installation Steps
1
Installation Instructions
- Bugflector II
®
Hood shield
Car Wash Supplies
NOTE: Actual application may vary slightly from illustrations.
Raise hood.
- Carflector
®
Bump On x4
Clean Towel
Locate the fasteners that attach the rubber seal to the underside
of the hood. Remove and discard. Honda Si shown.
2
Page 1 of 2
I - Sheet Number BF27 Rev.A
®
Fastener x4
Phillips screwdriver