Eu Declaration Of Conformity - Dogtra PATHFINDER2 Serie Mode D'emploi

ATTENTION
Do not use more than one splitter cable with a single battery charger.
Charger Info
Manufacturer : E-SUN Manufacturing country : CHINA
Model name : MKC-0502500SEUU
INPUT : 100-240V~50/60Hz 0.4A / OUTPUT : 5V 2500mA 12.5W
* During battery charging, the unit must be close to the wall outlet and the wall
outlet must be easily accessible for security reasons.
The GS mark, which is regulated by German law and
recognized worldwide, is a seal of approval for "Geprüfte
Sicherheit" (Tested Safety) and means that the product is in
compliance with the German product Safety Law.
The Conformité Européenne (CE) Mark is the European
Union's (EU) mandatory conformity marking for regulating
the goods sold within the European Economic Area (EEA).
A Class II or double insulated electrical appliance is one
which has been designed in such a way that it does not
require a safety connection to electrical earth (ground).
For indoor use only
Do not dispose of your product with your household waste.
It has to be disposed of in compliance with your local WEEE
(Waste Electrical and Electronic Equipment) Regulations.
A power supply with this marking is in compliance with the
global energy efficiency regulations, including the upcoming
US Department of Energy's (DoE) Level VI efficiency
standard.

EU DECLARATION OF CONFORMITY

Applicant : Dogtra Co., Ltd. Manufacturer : Dogtra Co., Ltd.
Declare the following apparatus
Product Name : Pathfinder2
Model Name : PT20E
Frequency Range : SRD (169.404 5 MHz ~ 169.470 5 MHz)
BT (2 402 MHz ~ 2 480 MHz)
Output Power(Rated Power, Plus Tolerance) : SRD (24.87 dBm), BT (0 dBm)
Accessories that impact RF Compliance : N/A
RF Software/Firmware that impacts RF Compliance : N/A
Declares that the product(s) listed above conform(s) to following documents
Essential Requirement
Safety EN 62368-1:2014+A11:2017
EN 50566:2017
Health
EN 50663:2017
ETSI EN 301 489-1 V2.2.3(2019-11)
EMC ETSI EN 301 489-3 V2.1.1(2019-03)
ETSI EN 301 489-17 V3.2.4 (2020-09)
ETSI EN 300 220-1 V3.1.1(2017-02)
Radio ETSI EN 300 220-2 V3.1.1(2017-02)
ETSI EN 300 328 V2.2.2(2019-07)
EU Regulatory Conformance
This product is compliant with the essential requirements and other relevant
provisions of the EMC Directive 2014/30/EU, Radio Equipment Directive 2014/53/
EU, and LVD Directive 2014/35/EU of the European Parliament and the Council of 26
February 2014.
This product has been constructed so that it can operate in at least one member
state i.e. France, Italy. and It is also available in the United Kingdom. There are no
usage restrictions.
CE RF Exposure Requirements
The highest SAR value, tested per CE RF exposure guidelines for Limb SAR, as
described in this user guide, is 0.127 W/kg.
The full text of the device's statement of compliance is available on written request
to the following address : 12-14 Rue Augustin Fresnel, 78310 Coignières, France. It is
also available on the following website : www.dogtra-europe.com
Authorized Signatory:
Name/Position : H.K. YANG / CEO Date : 30/09/2022
Applied Standards