LawnMaster VBRM16 Manuel D'instructions page 33

TROUBLESHOOTING
Error indicator is
yellow continuous.
Error indicator is red
continuous.
Ultrasonic indicator
is yellow flashing.
The battery indicator
is red flashing.
The robotic lawnmower has been
tilted for a prolonged time in one
direction.
The rear wheels have been lifted
due to an obstacle.
The mower has fallen over.
STOP button is pressed.
The robotic lawnmower cannot
see grass.
Sensor error.
Overcurrent in the motor or motor
fault.
Operation system error.
The mower has a communication
issue with camera.
The temperature of battery pack
is abnormal.
Electric core fault. (The error
indicator is red continuous at the
same time.)
Remove and re-insert the isolator key.
Remove any obstacles. Restart the
mower.
Remove and re-insert the isolator key.
Restart the mower.
Move the robotic lawnmower to the
lawn and restart it.
Remove and re-insert the isolator
key. Restart the mower. If the problem
remains, contact the After Sales
Helpline.
Remove and re-insert the isolator
key. Check for and remove any
obstacles around the rear wheels and
the blade disc. Increase the cutting
height. Check whether the grass is
too tall. If necessary, mow the grass
to below 60 mm with a conventional
lawn mower. Restart the mower. If the
problem remains, contact the After
Sales Helpline.
Remove and re-insert the isolator
key. Restart the mower. If the problem
remains, contact the After Sales
Helpline.
It is too dark for camera to work.
Operate the mower during daylight
hours only. Remove and re-insert the
isolator key. Restart the mower.
Allow the machine to cool down to
reach a normal temperature. Then
restart the mower. If the problem
remains, contact the After Sales
Helpline.
Remove and re-insert the isolator
key. Restart the mower. If the problem
remains, contact the After Sales
Helpline.
33