Operation - LawnMaster VBRM16 Manuel D'instructions

OPERATION

Control Panel (See Fig. 16)
1
START/ON
Long press for 3 seconds to power on the mower. Press after selecting the Auto Mow or the
Spot Cutting Button to start mowing.
2
Battery Indicator
Battery Indicator
Green, Continuous
Red, Continuous
Red, Flashing
3
Auto Mow Button
Long press 2 seconds to select random auto cutting mode followed by START/ON.
4
Error Indicator
Error Indicator
Off
Yellow, Continuous
Red, Continuous
5
Spot Cutting Button
Long press 2 seconds to select spot cutting mode followed by START/ON.
6
Ultrasonic Indicator
Ultrasonic Indicator
Green, Continuous
Off
Yellow, Flashing
7
Ultrasonic On/Off Button
Single press to turn off/turn on the ultrasonic function.
Sufficient power for mowing/ ready for mowing.
Recharge required.
The temperature of battery pack is abnormal, or the electric
core fault.
The mower is in normal operation.
The lift sensor is activated. / The obstruction sensor is activated.
/ The mower is tilted. / The rear wheels are lifted (slipping) due
to an obstacle. / The mower has fallen over. / STOP button is
pressed. / The mower cannot see grass.
Sensor error. / Motor fault. / Operation system error.
The ultrasonic function is on.
The ultrasonic function is turned off.
The mower has a communication issue with camera.
21
Status
Status
Status