Maintenance; General Maintenance - LawnMaster VBRM16 Manuel D'instructions

MAINTENANCE

WARNING
Always switch the product off, remove the isolator key and the battery pack and let the product
cool down before performing inspection, maintenance and cleaning work.
WARNING
If a part becomes worn or damaged, use manufacturers recommended replacement parts. Use of
any other parts may create a hazard or cause product damage.
WARNING
Do not use any attachments or accessories not recommended by the manufacturer of this product.
The use of attachments or accessories not recommended can result in serious personal injury.

General Maintenance

■ Keep all safety devices and the motor housing free of dirt and dust. Avoid using solvents
when cleaning plastic parts. Most plastics are susceptible to damage from various types of
commercial solvents and may be damaged by their use. Use clean, dry cloths to remove dirt,
dust, oil, grease, etc.
■ Periodically check all nuts and bolts for proper tightness to ensure safe operation of the mower.
■ Remove any buildup of grass and leaves on or around the mower. Wipe the mower clean with a
dry cloth occasionally. Do not use water.
Replacing the Mower Blades (See Fig. 19)
WARNING
Always wear protective, heavy gloves when performing blade maintenance. Failure to heed this
warning could result in serious personal injury.
WARNING
Before performing any maintenance, make sure the isolator key and the battery have been
removed. Failure to heed this warning could result in serious personal injury.
Always check to see if the blades are in good condition. If the blades are blunt, damaged or
showing signs of imbalance, they must be replaced. Only use recommended replacement blades.
Make certain ALL 3 blades and screws are replaced at the same time to keep a balanced cutting
system. Visit www.cleva-europe.com for information on where to purchase additional blades.
27