Philips AquaTrio 9000 Serie Mode D'emploi page 8

English
10
Charging
The appliance is equipped with a 25 V Li-Ion battery. Charging takes 4 hours.
1 To charge the appliance, insert the power plug into the socket on the back of
the appliance. Then insert the adapter into the wall socket.
2 A value between 0% and 90% flashes on the screen to indicate that the
appliance is charging.
3 When the appliance is fully charged, the value 100% lights up on the screen.
After a few minutes, the display will switch off.
Warning: Store and charge the appliance at a temperature
above 5 °C and below 35 °C.