Philips AquaTrio 9000 Serie Mode D'emploi page 7

Assembling the Vacuum only set-up
1 To assemble the Vacuum only set-up, attach the 3-in-1 handheld to the dust
bucket ('click').
2 Attach the dust bucket to the tube ('click').
3 Insert the tube into the LED nozzle.
4 To store the Vacuum only set-up, place it in the After-Clean & Storage station
by first placing the LED nozzle onto the long side of the baseplate and then
pressing the tube into the holder.
Tip: It is possible to slide the holder for the Vacuum only set-up and put it back
upside down if you want to place the Vacuum only set-up on the other side of
the After-Clean & Storage station.
English
9