Philips AquaTrio 9000 Serie Mode D'emploi page 47

Problem
The appliance stopped
working.
The sound of the appliance
changed while cleaning.
The appliance has a lower
suction power than usual.
Dust escapes from the
appliance.
Possible cause
You accidentally touched the
on/off button with your
hand.
The appliance is clogged.
There might be hairs or other
obstacles entangled around
the roller brush.
Obstacles are blocking the
cyclone.
The filter and/or the cyclone
are dirty.
Something is blocking the
cyclone.
The suction channel behind the
roller brush is clogged.
You have not attached the
filter case properly to the dust
bucket or you have not
attached the dust bucket
properly to the appliance. In
both cases, there will be a loss
of suction power.
The brush is clogged with hair
or dirt.
The foam filter is not present in
the filter case, or the top cover
is missing.
Solution
Switch on the appliance by pushing the
on/off button.
Switch the appliance off and remove the
battery or powerhouse. Then locate and
remove the cause for the blockage. After
that, restart the appliance. If you cannot
identify the cause of the blockage, restart
the appliance. This might already solve the
problem.
Please check for obstacles and remove
them (see 'Cleaning the roller brush').
Check the cyclone for obstacles and remove
them (see 'Cleaning the cyclone').
Empty the dust bucket. Clean the filter and
the cyclone. Make sure that you remove
any hair and dirt that is stuck in the cyclone.
You can remove the cyclone for easy
maintenance (see 'Cleaning the cyclone').
Make sure that you wash the filter at least
once a month if you use the appliance
regularly (see 'Cleaning the filter').
Check the cyclone for objects stuck in it and
remove any object that is blocking the
cyclone. Make sure that you remove any
hair and dirt that is stuck in the cyclone (see
'Cleaning the cyclone').
Remove the roller brush and check the
suction channel for obstacles and remove
them.
Make sure that you attach the filter case to
the dust bucket and the dust bucket to the
appliance properly (see 'Cleaning the dust
bucket ').
Switch the appliance off and clean the
roller brush with a pair of scissors or by
hand (see 'Cleaning the roller brush').
Make sure that the filter is in the appliance
and assembled correctly (see 'Cleaning the
filter').
English
49