Philips AquaTrio 9000 Serie Mode D'emploi page 12

English
14
Active protection system
Tips and other important information
10 Use the cleaning mode button to choose between three different settings:
-
Normal wet mode
-
Intense wet mode
-
Water absorption mode
By selecting the normal water mode, you can use the appliance for regular wet
cleaning. The intense wet mode is for cleaning extra stubborn stains.
If there are wet spots on the floor after cleaning, you can select absorption mode
to clean them up. We also recommend using it when lifting the appliance over a
threshold, carpet or stairs (see 'Tips and other important information').
If you select water absorption mode, the appliance will stop supplying water and
increase suction power for 45 seconds to absorb any water on the floor.
Note: older models feature normal wet mode and intense wet mode, but
not water absorption mode.
-
This appliance is equipped with an active protection system. This active
protection system has been designed to recognize when a foreign object
other than dirt or liquid is picked up from the floor.
-
When the system is activated, the appliance switches off and the i3 message
appears on the display (see 'Display icons and their meaning'). The active
protection system can also be activated when the microfiber brushes are too
wet, when you move the appliance over a carpet or a rug, or when you move
it over flooring that is not properly affixed.
-
It is not necessary to vacuum the floor before mopping, as the Vacuum &
Mop set-up actively wet-cleans your hard floor to capture all kinds of dirt,
including liquids and stains. On carpets and rugs, use the Vacuum only set-up.
-
If your hard floors do not need mopping, simply use the vacuum only set-up
which features LED lights and PowerCyclone 12 technology for precise and
powerful dirt pick-up.
-
You can move the appliance just as quickly as a vacuum cleaner. To remove
difficult stains, click the cleaning mode button to activate the intense wet
mode and move the appliance slowly over the stains.
-
The appliance can leave a small puddle of water on the floor if you do not
move the appliance while switching it off. You can reduce the size of the
puddle by moving the appliance while switching it off. If needed, you can
remove the last drops with a cloth.
-
It is recommended to activate the water absorption mode
appliance over a threshold, carpet or stairs during cleaning. This will prevent
dirty water from dripping out of the AquaSpin nozzle.
-
When moving the appliance, it is recommended to stretch your arm to reduce
unnecessary tension on the muscles. In this position, you have the best
control over the appliance when cleaning, and it will be the most
comfortable.
Note: When you use the water absorption mode
out of the appliance and the suction power increases. After 45 seconds, if you
when lifting the
, no more water comes