Télécharger Imprimer la page

SilverCrest SKMP 1300 D3 Mode D'emploi page 50

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 56
13. Trouble-shooting
If your device fails to function as required,
please try this checklist first. Perhaps there is
only a minor problem, and you can solve it
yourself.
DANGER! Risk of electric
shock!
Do not attempt to repair the device your-
self under any circumstances.
Fault
• Has the device been
• Check the connec-
• Is the cover 8 mount-
No function
• Has the overheating
• Is the drive arm 19
Blender cannot
• Is the lid 2 mounted
be switched on.
• Switch off immediate-
Whisk 21, beat-
er 20, dough
hook 22, or
blades of the
blade assem-
bly 7 will not
turn or will turn
only with great
difficulty.
48 GB
Possible causes /
Action
connected to the
power supply?
tion.
ed correctly?
protection switched
off the device (see
"Overheating protec-
tion" on page 42)?
not completely fold-
ed down?
correctly?
ly, remove the mains
plug 14 and check
the following:
- Blockage in the
container?
- Food too tough or
too hard?
- Device not assem-
bled correctly?
14. Disposal
This product is subject to the
provisions of European Direc-
tive 2012/19/EC. The sym-
bol showing a wheelie bin
crossed through indicates
that the product requires sep-
arate refuse collection in the European Un-
ion. This applies to the product and all
accessories marked with this symbol. Prod-
ucts identified with this symbol may not be
discarded with normal household waste, but
must be taken to a collection point for recy-
cling electric and electronic appliances.
This recycling symbol marks
e.g. an object or parts of the
material as valuable for recy-
cling. Recycling helps to re-
duce the consumption of raw
materials and protect the envi-
ronment.
Packaging
When disposing of the packaging, make
sure you comply with the environmental reg-
ulations applicable in your country.

Publicité

loading