SilverCrest SKMP 1300 D3 Mode D'emploi page 41

8. Using the blender
jug
DANGER! Risk of injury from
cutting!
Please remember that the blades of the
blade assembly 7 are very sharp:
- Never touch the blades with your
bare hands in order to avoid cuts.
- When emptying the blender jug 5,
ensure not to touch the blades of the
blade assembly 7.
WARNING! Risk of material dam-
age!
Do not use the blender jug for process-
ing particularly hard foodstuffs, such as
frozen food, bones, nutmeg, cereals or
coffee beans.
NOTE: when you use the blender jug 5, the
axle 23 also turns. The mixing bowl 16 and
splash guard 18 should therefore also be
mounted, but not a mixing tool 20/21/22.
Using and removing the blade
assembly
The blender jug 5 must never be used with-
out the blade assembly 7, since the blade
assembly 7 seals the blender jug 5 on the
bottom.
DANGER! Risk of injury from
cutting!
When removing and inserting the blade
assembly 7 ensure not to touch the
blades.
When removing and fitting the seal 6
for the blade assembly 7, be careful not
to injure yourself on the blades.
In order to remove the blade assembly 7,
proceed as follows:
1. Turn the blender jug 5 upside down.
2. Turn the blade assembly 7 clockwise at
the two handles 25 until the knife as-
sembly comes loose.
3. Pull out the blade assembly 7 carefully.
25
25
39
GB